METRObility Optical Systems R380-SS - Manual (Page 13)

Radiance Multi-Rate Line Card 13
5
• Insert the card into a slot on the chassis making sure that the top and
bottom edges of the circuit board are aligned with the top and bottom
card guides in the chassis. Do not force the card into the chassis
unnecessarily. It should slide in easily and evenly.
• Slide the card in until the top and bottom edges of the front panel are
flush and even with the top and bottom edges of the chassis.
• Turn the thumbscrew clockwise until it is snug to secure the card to
the chassis. The card is now properly installed and ready for
connection to the network.
Connect to the Network
To connect the line card to the network, insert the fiber cables into the
appropriate connectors as illustrated below. Make sure the card is
secured to the chassis before making network connections. Once power
is applied to the unit, correct connectivity can be verified via the signal
detect (SD) LED, which should be lit.
100 BASE
redundant twister “
MAIN
RESET
LK
AT
PRIMARY
LK
AT
SECONDARY
LK
AT
R
X
T
X
R
X
T
X
PWR
SW
100 BASE
redundant twister “
MAIN
RESET
LK
AT
PRIMARY
LK
AT
SECONDARY
LK
AT
R
X
T
X
R
X
T
X
PWR
SW
100 BASE
redundant twister “
MAIN
RESET
LK
AT
PRIMARY
LK
AT
SECONDARY
LK
AT
R
X
T
X
R
X
T
X
PWR
SW
1000 BASE
1
2
LK
AT
LK
AT
SW
MULTIRATE
LK
AT
SD
AT
PWR
1000 BASE
M
A
I
N
P
R
I
S
E
C
RESET
LK
AT
LK
AT
AT
SEC
PWR
100 BASE
LK
AT
LK
AT
PWR
R
X
T
X
R
X
M
M
S
M
T
X
100 BASE
LK
AT