Marantz SA8400 - Manual (Page 12)

10
ENGLISH
START SOUND MODE
When a Super Audio CD hybrid layer discs that has
both a Super Audio CD high sound quality stereo
area and a CD area information are to be played,
this player makes it possible to set the layer/area
(Super Audio CD or CD) to be preferentially played.
This setting can be made when the tray is closed
and there is no disc in the disc tray.
q Press SOUND MODE button on the player.
The currently selected layer/area is displayed.
If the Super Audio CD is selected : Super Audio CD
If the CD is selected
: CD
w Press the SOUND MODE button again to display
the layer/area to be played first, and then leave
the setting for at least two seconds to register the
setting for the start sound mode.
Caution
* Even when discs are changed over or the power
turned off, the “start sound mode” setting is stored
in the memory and remains unchanged.
* At the time of shipment, the sound mode is set to
Super Audio CD.
PLAYING YOUR FAVORITE TRACKS
OF A DISC
SPECIFY TRACK NUMBER TO PLAY (DIRECT
SEARCH)
Specify track number with numerical buttons (0-9)
on the remote
(example)
3rd track : Press 3 .
12th track : Press 1 and then press 2
( w i t h i n a p p r o x i m a t e l y 1 . 5
seconds).
If the first pressed number is only in the digit of ones
and not in the digit of tens, search begins
approximately 0.5 second after.
If a wrong number is pressed
Press correct number again.
* If a track number that is not in the disc is specified,
“No Track” will be shown on the main display. Please
specify a correct track.
SKIPPING TO THE PREVIOUS OR NEXT TRACK
(TRACK SKIP)
To listen to a track posterior to the current track
Press buttons on the main unit or
button on the remote the number of times you want
to proceed tracks.
To listen to a track prior to the current track
Press buttons on the main unit or
button on the remote go back to the beginning of the
current track. Then press
buttons on the
main unit or button on the remote the number
of times you want to go back.
PLAYING YOUR FAVORITE PARTS OF
A DISC (SEARCH)
If , buttons on the main unit or
, buttons on the remote are kept pressing
during playback, track search begins. Release the
button when the point you want to listen to gets close.
* No sound is output during the search operation.
REPEATED DISC PLAY (REPEAT
PLAY)
ALL TRACK REPEAT
When REPEAT button on the remote is pressed,
“ ” “ALL” indicator will light up and all track repeat
play begins.
To Return to Normal Play
Press REPEAT button two times. “ ” “ALL”
indicator will disappear, repeat mode will be off and
it returns to normal play mode.
* If REPEAT button is pressed when in program
mode, programmed tracks are played repeatedly.
ONE TRACK REPEAT
Press REPEAT button on the remote two times.
“ ”, ”1” indicators will light and the track will be
played repeatedly.
To Exit from One Track Repeat
Press REPEAT button. “ ” “1” indicator will
disappear, repeat mode will be off and it returns to
normal play mode.
A-B REPEAT
qPress A–B button on the remote at your chosen
starting point. The “A-B” indicator will blink.
wPress A–B button again at your chosen end
point. “A-B“ “ ” indicator will light up and the
chosen section will be played repeatedly.
To Exit from A-B Repeat
Press A–B button on the remote. “A-B“ “ ”
indicator will disappear, A-B repeat mode will be off
and it returns to normal play mode.
* A-B repeat cannot be done when random play is
going on.
* The end point (where “A-B” “ ” indicator is lit up)
of the repeat section cannot be set before the time
of the starting point (where “A-B” indicator blinks)
of the repeat section.
PLAYING TRACKS IN A RANDOM
SEQUENCE (RANDOM PLAYBACK)
When RANDOM button on the remote is pressed
in stop mode, and then PLAY button is pressed,
the unit shuffles track order automatically and plays
all the tracks in the shuffled order. The RNDM
(random) indicator lights.
• The gap between tracks will be approximately 2
seconds during random play.
To Exit from Random Play and Return to Normal Play
Press the STOP button, and then press the
RANDOM button while playback is stopped.
The RNDM (random) indicator goes off, and random
play is released.
If buttons on the main unit or button
on the remote are Pressed during Random Play
It jumps to the next track of the shuffled order.
If , buttons on the main unit or
, buttons on the remote are Pressed during
Random Play
Search will be done only in the current track. Search
does not go to the previous or next track.
To Listen to Random Play Repeatedly
Press REPEAT button on the remote once during
random play. Every time the order will be shuffled.
• If RANDOM button is pressed during program
play, the programmed tracks will be shuffled.
PLAYING TRACKS IN A SPECIFIC
SEQUENCE (PROGRAM PLAY)
You can arrange and play tracks in a specific
sequence. Up to 30 tracks to be played can be
programmed.
(Example: To program the 7th track in a disc
with 25 tracks)
TOTAL
TRK
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
q Press PROG button on the remote in stop
mode. “PROG” indicator will blink and it goes to
program mode.
PROG TOTAL
TRK
w Choose a track to be programmed with numeric
buttons on the remote.
(Example: The 15th track is chosen and it’s
length is 4min30sec)
PROG TOTAL
TRK
15
e With the sequence described in step w above,
program another track. Repeat that sequence to
program all the tracks you want. You can program
up to 30 tracks.
(Example: The 7th track is chosen and total
length of 7th and 15th is 7min50sec)
PROG TOTAL
TRK
7 15
r Press PLAY button to starts playback in
programmed order.
* When 21 or more tracks are programmed, will
light up instead of the track number indicator.
Lights up
Lights up
Only the numbers of
programmed tracks light up 1st track programmed
Lights up
Total playing time of
programmed tracks Total programmed number