Marantz SA8400 - Manual (Page 13)

11
ENGLISH
To Check the Programmed Tracks
Press the SCROLL/RECALL button on the remote
control during the program or when the program is
stopped (“PROG” lights up).
Every time press
SCROLL/RECALL button, the
programmed tracks will be displayed one after the
other in order.
To Delete a Programmed Track
q Press CANCEL button in stop mode when
program has been made (When “PROG” indicator
is lighting up).
w E ve r y t i m e p r e s s CANCEL b u t t o n , t h e
programmed tracks are deleted in order from the
last track programmed.
Also, the deleted track’s track number indicator
will disappear.
To Clear Whole Program
Press STOP button two times while in program
play. In the stop mode, press STOP button once.
Program can also be cleared by pressing
OPEN/CLOSE key to open the disc tray.
To Add Tracks to Program
Tracks can be added to the end of program when
program is remaining (“PROG” indicator is lighting
up) and in stop mode.
However tracks cannot be added to the program
when the RNDM (random) indicator is lit up.
* Please be careful about the following matters.
• When programming 1st through 9th tracks in a disc
that has over 10 tracks by using numeric buttons.
For instance, programming the 3rd track after
programming the 1st track, press 3 button more
than approximately 1.5 seconds after 1 button is
pressed. When a program is finalized, the time is
updated.
• Likewise, when programming a track at 10th or
after. For example, to program 13th track, press 3
button within approximately 1.5 seconds after 1
button is pressed.
• When programming a track in a disc that has less
than 9 tracks. For instance, to program the 5th track
after 4th track has been programmed, press 5
button more than approximately 0.5 second after
4 button is pressed.
Q&A
• How many tracks can be programmed?
Up to 30 tracks can be programmed for
program play.
• Can I listen to program play repeatedly?
Press REPEAT button once. “ ” “ALL”
indicator will light and program play will
be repeated.
• Can I shuffle the programmed track order?
Press RANDOM button in stop mode.
SEARCHING YOUR FAVORITE TRACKS
(AMS (AUTOMATIC MUSIC SCAN) PLAY)
This feature is convenient to search where your
favorite track is.
If
AMS button on the remote is pressed in stop
mode, the PLAY “ 3” indicator will blink and the
beginnings of all the tracks will be played for 10
seconds each starting from the first track.
Also, if the
AMS button is pressed during playback,
the PLAY indicator “ 3” will blink, and the program
will jump to the next track after a display time of
approximately 10 seconds.
TRK
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
When you find a song that you want to listen to, press
the
AMS button again or press the PLAY button.
PLAY indicator will light up constantly and normal
playback will begin from the current track.
* If the AMS button is pressed after the tracks are
programmed, only the programmed tracks are
played by AMS.
ABOUT THE TEXT INFORMATION
DISPLAY
The following items of text information in Super Audio
CD discs can be displayed by pressing
TEXT button
on the remote.
Never theless, which items of information are
recorded depends on discs so some information may
not be displayed. This unit skips unrecorded
information to display.
• During playback
When
TEXT button is pressed on the remote, “Track
Title” of the currently playing will be displayed.
• In Stop Mode
Each time
TEXT button on the remote is pressed,
text information will be displayed in the following
order.
• This unit can display 12 characters in one time. If
information is longer than 12 characters, the
display will scroll right to left.
• This unit can display only alphabets, numeric
numbers and symbols. Chinese and Japanese
characters cannot be displayed. If information is
in Chinese and Japanese characters, the unit
displays nothing.
QUICK REPLAY
When Q.REPLAY button is pressed during playback,
the unit goes back to the amount of time set by the
MENU and starts playback from there.
* Playback that goes beyond the track is not allowed.
Also, when the total time of the track being played
is shorter than the time set for quick replay, or when
the playback time is shorter than the time set for
quick replay, if
Q.REPLAY button is pressed, the
track will be goes back to the start of that track and
playback is started from there.
To Set Quick Replay Time
q If a disc is loaded in the disc tray, eject the disc
and close the tray.
w Press the MENU button on the remote control.
e Press ENTER button on the remote while “Quick
Replay” is displayed. The current setting time will
be displayed.
r Use or button to set the time. (10 sec./
20 sec./30 sec.)
t After set the time, press MENU button two times.
The display will return to the normal display.
Caution:
* When there is no key input for about 4 seconds
during this series of operations, the setting will be
configured to the conditions at that time and the
display will return the time display.
Blinks
Time Display
Album Title
Album Artist