Marantz SR7002 - Manual (Page 16)

SR8002/SR7002
RS-232C Control Specification
Page: 16 / 32
Document Version [1.00]
Company Restricted
For Analog Tuner Model
Command Reply from Slave
VALUE “MTF:0xxxxx“ (xxxxx = freq.)
UP “MTF:1“
DOWN “MTF:2“
Auto-UP “MTF:3“
Auto-DOWN “MTF:4“
HD Auto-UP
（ HD Radio Only）
“MTF:5“
This command is available
for SR8002 only.
Multi Room A
Tuner1 Frequency
HD Auto-DOWN
（ HD Radio Only）
“MTF:6“
This command is available
for SR8002 only.
“MTF:xxxxx”
(xxxxx = Frequency)
if ( xxxxx < 00256 ) band =
XM;
else if (xxxxx < 02000)
band=AM;
else band=FM;
(ex.“08750” = FM87.50MHz)
*Auto-UP/DOWN dose not
operate in XM
*XM can be selected When Band
is XM.
VALUE “MTP:0ww” (ww = preset nr.)
UP “MTP:1”
DOWN “MTP:2”
SCAN Start “MTP:3”
Multi Room A
Tuner1 Preset
SCAN Stop “MTP:4”
“MTP:ww”
(ww = current preset nr.)
(ww = 01 ~??)
TOGGLE “MTM:0”
OFF(MONO) “MTM:1”
ON(AUTO) “MTM:2” Multi Room A
Tuner1 mode
Digital Auto
（ HD Radio Only）
“MTM:3”
This command is available
for SR8002 only.
“MTM:0”( - ),
“MTM:1”(MONO),
“MTM:2”(AUTO)
“MTM:3”(DigAUTO)