Mustek GSMART S50 - Manual (Page 12)

Using Secure Digital (SD) memory cards
Note: Only Secure Digital (SD) memory cards are compatible with the camera.
To use a SD card, insert the card into the SD slot in your camera. The SD card indicator on
the LCD is shown.
11
SD card icon is displayed
When card is inserted
It may be necessary to format the SD card if the card has been used in devices other than
your camera. To format, refer to Formatting Flash Memory or SD Card in section 3.
Insert SD card in
the card slot
Note: “0” displays at lower right of the LCD display if
• SD card is full, or
• SD card is write-protected, or
• An error writing to the card.
Changing resolution
Your 3.1MP Digital Camera offers three choices in resolution: Large, Medium and Small.
Large resolution is 2592 x 1944 pixels, Medium resolution is 2000 x1500 pixels, and Small
resolution is 1000 x 750 pixels. The higher resolution setting allows for an image to be
printed as large as 8 x 10 inches.
To change the resolution:
• Turn the camera on and press the mode button.
• Select Size and then select LARGE, MED or SMALL.