Mustek GSMART S50 - Manual (Page 21)

20
Check computer Connect the camera to
the PC with the USB
cable and select [My
Computer] – [Control
Panel] – [System] –
[Device Manager]. In
the [Device Manager]
window delete
[Compose USB
device] or [Unknown
device] in [Other
devices]. Then
disconnect the camera
and install the
software before
reconnecting the
camera to the PC.
Camera
malfunctions
while in used Electrostatic
discharge
interfered with
the camera Check if the camera is
connected to the PC Turn off the camera
and then turn it back
on. If connected to
the PC, disconnect the
camera from the USB
cord, and turn it off
then on again.
LCD The LCD does
not light up If you turn the power off
with the LCD off, the
LCD screen is still set to
OFF the next time the
power is turned on Press the LCD button
once to turn on the
LCD
LCD displays
“E2” when a
SD memory
card is inserted Incompatible
file system on
SD memory
card Format SD card Refer to Deleting an
image/Formatting
internal flash
memory or SD card
in section 3