MITSUBISHI ELECTRIC WD-52527 - Manual (Page 78)

78
Chapter 5. TV Menu Screen Operations
Operation of PIP and POP
Display programs from analog channels, analog inputs
or devices as Picture-In-Picture (PIP) and Picture-
Outside-Picture (POP). The TV has a second analog
tuner for non-scrambled analog channels received on
Ant-1 and will display them as the PIP/POP sub-pictures.
Digital channels and devices can be shown as the main
picture but cannot be the sub-picture. To turn PIP/POP
off, wait at least 10 seconds, and press PIP/POP. The
next time you activate PIP/POP, the last used PIP/POP
option will be displayed.
Changing PIP/POP Device
Press PIP DEVICE to change the PIP or POP picture
source device. A menu similar to the Device Selection
menu will be displayed.
Changing PIP/Side-by-Side Channels
Press PIP CH to scroll up and down through memorized
channels on Ant-1 or a cable box.
Exchanging Program Images
Press ENTER/EXCH (WD-52527, WD-62527) or EXCH
(WD-52528, WD-62528) to exchange the main picture
and the PIP/POP picture. Pictures from digital channels
can only be shown as the main picture.
Moving PIP Image
If no menus are on the screen, press ADJUST , ,
or to move the PIP display anywhere on the main
screen.
Automatic POP Switching
(WD-52528, WD-62528)
When automatic POP switching is active, the TV will
cycle through memorized analog channels on Ant-1 or
strobe pictures from other A/V components in the POP
display. Press PAUSE to pause or restart automatic
POP switching.
Selecting POP “Live” Image
(WD-52528, WD-62628)
Press PAUSE to stop automatic cycling through
channels, then press ADJUST , , or to select a
different POP “live” image.
Freezing the PIP and Side-By-Side Picture
Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a “live” image.
Press PIP/POP to activate the PIP/POP option. With
each press of the PIP/POP button on the TV remote
control (within 3 seconds of each other), the PIP/POP will
cycle through the following display options:
MAIN
PICTURE Side-by-Side
• POP
side-by-side
pictures
MAIN
PICTURE
POP 1
POP 2
POP 3
• 3 POP
(WD-52528,
WD—62528)
PIP Ant-1 17 Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
PIP
• PIP
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1
• PIP/POP: off
Side-by-Side cannot show the same channel
or device on both sides.
When Ant-1 or Ant-2 is the main picture,
Ant-2 is not available as the PIP, POP or Side-
by-Side.
IMPORTANT