A/v discs – MITSUBISHI ELECTRIC WD-52631 User Manual

Page 85

Advertising
background image

Chapter 7. Using IEEE 1394 Devices

85

Copying A/V Disc Recordings

Tracks you record to disc may have copy restrictions
assigned to them. To learn a track’s copy status, high-
light the track in the Track List and press

INFO. Tracks are

assigned one of these ratings:

Copy Free
(or no status shown)

No copy restrictions apply.

Copy Never

The track cannot be transferred to
another recording device. Tracks
of this type may have an assigned
retention period. See below for
more information.

Retention Period

Some

COPY NEVER tracks have a retention period

assigned by the content provider. The retention period
is the length of time you can keep and view the record-
ing. The initial retention period, if any, is shown next to
the copy status in the Track List

INFO display (see figure 4).

To check how much time remains of the retention period,
start viewing the recording and press

INFO.

Note: The retention period for all tracks on the disc

expires if there is any loss of power to the TV, even
momentary. For example, expiration of the reten-
tion period will occur if you:
• Unplug the TV from the AC power source.
• Experience a power outage or power

fluctuation.

Remember that you can safely turn off TV power
using the

POWER button without affecting the reten-

tion period.

To Copy a Track to Another IEEE 1394 Device

1. Press

INPUT on the remote control and press

to select the source A/V disc. Press

ENTER to open the

Track List.

2. Press or to select a track. Then press

ENTER to

start playback.

3. Press

(PAUSE) to pause playback.

4. Press

(RECORD) on the TV remote. The Record

menu will display.

5. In the

Record To section, review the destination

device (A/V Disc, DVCR). Change if necessary.

6. Set the duration to the length of the original track or

longer.

7. Press

a second time to start recording.

A/V Disc Search by Time

While playing an IEEE 1394 A/V disc you can search to a
specific time in the recording.

1. Start playing the desired track on the A/V disc.

2. Use the number buttons to enter the time code posi-

tion of hours followed by minutes. For example, to
enter one hour and twenty-two minutes (1:22) into the
track, enter

1, 2, 2.

3. Press

ENTER to skip to the time code position. To

cancel the request or to start over, press

CANCEL

instead of

ENTER.

A/V Discs

A/V Disc Track List Screen

When viewing an A/V Disc:

• Press

GUIDE to display its Track List (see figure below).

• Press or to navigate through the Track List.
• To play a track, select it on the list, then press

ENTER.

• Press

INFO to view details for a highlighted track.

• To move through listings quickly, press

PAGE / .

• To delete a track, highlight it and press

CANCEL.

Figure 4. A/V Disc Track List screen

Advertising
This manual is related to the following products: