Unit operation, Warning, Table 1 operating voltage – Maytag Thru-the-Wall Room Air Conditioner User Manual

Page 6: High cool, Medium cool, Low cool, High heat

Advertising
background image

6

WARNING

This air conditioner is not meant to provide
unattended cooling or life support for
persons or animals who are unable to
react to the failure of this product.

The failure of an unattended air conditioner
may result in extreme heat in the
conditioned space causing overheating or
death of persons or animals. Take proper
precautions to avoid unattended operation.

VOLTAGE MEASUREMENTS
Before connecting the unit, measure the supply voltage.
Voltage must fall within the voltage utilization range given in
Table 1.

Operating Voltage

Unit Voltage

Voltage Utilization Range

Rating

Minimum

Maximum

230/208

197

253

115

103

126

Table 1

Operating Voltage

Unit Operation

Two rotary knobs (Figure 10) control temperature and
operational modes. They are located to the top left of the
cabinet front.

THERMOSTAT SETTING

COOLER

CO

OL

ER

W

A

ME

R

R

The thermostat controls the room temperature by turning
either the compressor or electric heater on and off while the
fan is running. Turn the thermostat control clockwise to
provide a cooler room temperature; turn it counterclock-
wise to provide a warmer one.
NOTE: If the fan cycle switch (see Additional Control
Inputs) is in the CYCLE mode, both the compressor and fan
will cycle on and off during the cooling modes.

OFF

OFF

LOW

HEAT

HIGH
HEAT

HIGH

COOL

LOW

COOL

FAN

ONLY

FAN

ONLY

LOW

COOL

HIGH

COOL

MED

COOL

HIGH COOL

This setting provides the most cooling output at the highest
efficiency possible. In this mode the fan runs on high and
the compressor cycles on and off.

OFF

FAN

ONLY

LOW

COOL

HIGH

COOL

MED

COOL

MEDIUM COOL

This setting provides quieter operation than High Cool. In
this mode the fan runs at medium speed and the compres-
sor cycles on and off.

OFF

OFF

LOW

HEAT

HIGH

HEAT

HIGH

COOL

LOW

COOL

FAN

ONLY

FAN

ONLY

LOW

COOL

HIGH

COOL

MED

COOL

LOW COOL

This setting dehumidifies the air and provides the quietest
fan operation. In this mode the fan runs at the lowest speed
and the compressor cycles on and off.

OFF

LOW

HEAT

HIGH

HEAT

HIGH

COOL

LOW

COOL

FAN

ONLY

HIGH HEAT

On high heat, the fan runs at its highest speed. In this mode
the electric heater cycles on and off by thermostat.

Advertising