Miele KM83-2 - Manual (Page 13)

Cleaning and care
If of a pot boils over, clean the burner
and the cooktop surface immediately,
to prevent the substance from burning
on.
Burners
The burners can be dismantled for
cleaning when cold.
Burner caps
The burner caps can be cleaned with a
solution of dishwashing liquid.
Do not use any caustic cleaners,
scouring powders, knives or hard
brushes, as these will scratch.
With time and use, the surface of the
burner caps will attain a matt finish.
Burner head
These can be cleaned with a damp
cloth or with a chrome / stainless steel
cleaner.
Electronic ignition
The ignitors must always be dry,
otherwise they will not spark.
From time to time, the ignitors should
be wiped with a damp cloth and dried
with a clean cloth.
Install the burner cap correctly on the
burner head after cleaning.
Important: The burners must be cor-
rectly installed before they are lit,
otherwise the ignitor could be dam-
aged.
Pan supports, ring support
Caution: the pan supports and the
ring support become hot during use.
The pan supports can be removed for
cleaning:
Lift the support at the back and pull
it out of the holders at the front.
Cleaning and care
13