MSI MS-6534 - Manual (Page 86)

Chapter 4
4-12
Chipset Features Setup
Configure DRAM Timing by
Selects whether DRAM timing is controlled by the SPD (Serial Presence
Detect) EEPROM on the DRAM module. Setting to SPD enables CAS#
Latency, RAS# Precharge, RAS# to CAS# Delay and Precharge Delay
automatically to be determined by BIOS based on the configurations on the
SPD. Selecting Manual allows users to configure these fields manually.
CAS# Latency
This controls the timing delay (in clock cycles) before SDRAM starts a read
command after receiving it. Settings: 3 Clocks and 2 Clocks. 2 Clocks
increases the system performance while 3 Clocks provides more stable
performance.
RAS# Precharge
This item controls the number of cycles for Row Address Strobe (RAS) to be
AMIBIOS SETUP - CHIPSET FEATURES SETUP
(C)1999 American Megatrends, Inc. All Rights Reserved
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
******** DRAM Timing *****
Configure DRAM Timing by
:SPD
CAS# Latency :3 Clocks
RAS# Precharge :3 Clocks
RAS# to CAS# Delay :3 Clocks
Precharge Delay :7 Clocks
DRAM Integrity Mode :Non-ECC
AGP Aperture Size :64MB
Delayed Transaction :Enabled
Note: Change these settings only if you are familiar with the chipset.