MSI MS-6534 - Manual (Page 94)

Chapter 4
4-20
USB Controller
This is used to enable or disable the USB ports. Settings: Disabled, USB
Port 0&1, USB Port 2&3 and All USB Port.
USB Legacy Support
Set to All Device if you need to use any USB device in the operating system
that does not support or have any USB driver installed, such as DOS and
SCO Unix. Set to No Mice if your need to use any USB device except for the
USB mouse.
On-Chip IDE
This allows you to enable or disable on-chip IDE controller. Settings:
Disabled, Primary, Secondary and Both.
Onboard Audio Chip (Optional)
Use the item to enable or disable the OPTIONAL onboard hardware audio
controller.
Integrated Peripherals
AMIBIOS SETUP - INTEGRATED PERIPHERALS
(C)1999 American Megatrends, Inc. All Rights Reserved
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
USB Controller :All USB Port
USB Legacy Support :Disabled
On-Chip IDE :Both
Onboard Audio Chip :Enabled
AC’97 Audio :Auto
AC’97 Modem :Auto
Floppy Controller :Enabled
Serial Port A :Auto
Serial Port B :Auto
Serial Port B Mode :Normal
IR Duplex Mode :Half Duplex
IR Pin Select :IRRX/IRTX
Parallel Port :Auto
Parallel Port Mode :ECP
EPP Version :N/A
IRQ :Auto
DMA Channel :Auto
OnBoard Midi Port :330
Midi IRQ Select :5
OnBoard Game Port :200