Miele KFN 9753 iD EN - Manual (Page 24)

Moving the shelves
The shelves can be adjusted according
to the height of the food:
^ Lift the shelf, pull it forwards slightly,
until the notch at the side is in line
with the shelf support. It can now be
moved up or down as desired.
The raised edge at the back of the shelf
must face upwards to prevent food
from touching the back of the
appliance.
Stops prevent the shelves from
unintentionally being pulled out too far.
Split shelf
To accommodate tall items such as tall
bottles or containers, one of the shelves
is divided. The front section can be
gently pushed under the rear section:
^ Push the rear half of the glass shelf
up slightly.
^ With the rear half pushed up, lift the
front half of the glass shelf slightly,
then slide it carefully under the rear
half.
To move the split shelf:
^ Remove both halves of the glass.
^ Fit the brackets onto the support on
the left and right sides at the desired
height.
^ Slide in the glass shelves one after
the other.
The glass shelf with the raised edge
should be placed at the back.
Fruit and vegetable drawers on
rollers
(depending on model)
The fruit and vegetable drawers are
mounted on rollers and can be pulled
out for loading, unloading and cleaning.
The roller inserts can also be removed
for cleaning.
Adjusting the interior fittings
24