Miele KFN 9753 iD EN - Manual (Page 44)

Fastening the dampers
^ With its exterior facing downwards,
again place the appliance door on a
stable surface.
^ Screw the ball joint b of the door
closing device c into the new fixing
hole.
^ Pull the door closing device c apart
and hook the mounting a onto the
hinge.
^ Hold the door closing device in this
position and screw the mounting a
to the hinge.
^ Hang the appliance doors on the
pre-fitted screws and push the doors
inward.
^ Tighten the screws at the top, middle
and bottom.
^ Snap on the covers a, b and c.
^ Replace the plugs d.
^ Insert the pins from above (if
necessary).
Adjusting the door hinges
44