Motorola MOTONAV TN500 Series - Manual (Page 13)

11 mount and connect the MOTONAV device
4 Locate the professional installation cable which is
shown here.
5 Connect the car kit to the MOTONAV device
cradle as follows:
a Connect cable connector L to the vehicle
integration kit connector B (shown on page
5).
b Connect cable connector J to the cradle
connector N.
c Connect cable connector K to the cradle
connector M.
6 Before peeling tape from mounting arm, place
mount and cradle with cables in desired location
on dashboard to confirm they do not interfere
with driver vision or airbags.
J
K
L
N M
68000202400a.fm Page 11 Wednesday, August 12, 2009 6:17 PM