MTD OEM-190-627 - Manual (Page 2)

2
FINDING MODEL NUMBER
This Operator’s Manual is an important part of your new snow thrower attachment. It will help you assemble,
prepare and maintain the unit for best performance. Please read and understand what it says.
Before you start assembling your new equipment, please locate the model plate on the
equipment and copy the information from it in the space provided below. The information on the
model plate is very important if you need help from our Customer Support Department or an
authorized dealer.
You can locate the model number by looking on the rear, right portion of the snow thrower impeller housing. A
sample model plate is explained below. For future reference, please copy the model number and the serial number
of the equipment in the space below.
Figure 1
• An example of what the model plate will look like is shown below.
CALLING CUSTOMER SUPPORT
If you have difficulty assembling this product or have any questions regarding the controls, operation or
maintenance of this unit, please call the Customer Support Department.
Call 1- (330) 220-4MTD (4683) or 1- (800)-800-7310 to reach a Customer Support representative.
Please have your unit’s model number and serial number ready when you call. See previous section
to locate this information. You will be asked to enter the serial number in order to process your call.
• Although both numbers are important, you will be asked to enter only your serial number before your call can
be processed.
Model Plate
MTD PRODUCTS INC
CLEVELAND, OHIO 44136
Copy the model number here:
Copy the serial number here:
(Model Number)
(Serial Number)
For more details about your unit, visit our website at www.mtdproducts.com