Miele DA210-3 - Manual (Page 30)

^ Bolt the flange firmly to the ceiling us-
ing the four M6 nuts.
^ Shorten the power cable as much as
possible and attach it to the terminal
block inside the chimney. See "Elec-
trical data".
Before connecting the appliance
read the "Warning and Safety In-
structions" and "Electrical data" sec-
tions.
^ Finally, being careful not to scratch
the chimney, push the cover plate up-
wards until the spring fixing clips
click into place. If installed correctly,
the cover should be secure and flush
against the ceiling.
^ Before using the appliance remove
the grease filter and remove the pro-
tective foil from the filter frame. Re-
turn filter.
Installation
30