Meyer Sound Self-Powered Loudspeaker HM-1 - Manual (Page 9)

9
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, California 94702
Telephone: 510 - 486 - 1166
FAX:
510 - 486 - 8356
E-mail: [email protected]
http://www.meyersound.com
Mounting Specifications
Dimensions
All units in inches
2.25"
2.0"
Permissible to drill to a depth of 1.5"
Permissible to drill in the light grey area
to a depth of 0.75" due to the venting ducts.
The same depth applies to the areas on
the other side of, and underneath the cabinet.
Do not drill in this area
due to the electronics!
The HM-1 does not ship with mounting hardware, but
its 9-ply birch wood construction easily accommodates
a variety of user-installed mounting hardware using
wood screws. Drilling areas and depths are indicated in
the diagram at left. The weight of a single HM-1 is
11.0 lb (5.0 kg).
Do not to drill in the dark grey area due to the presence of
sensitive amplifier and electronic circuitry. The light grey
area indicates the location of the venting ducts that are
essential to the tuning and performance of the enclosure.
The same areas exist on the other side of, and under-
neath the cabinet. It is permissible to drill in these areas
to a depth of 0.75”. It is permissible to drill in the white
area to a depth of 1.5”.
NOTE: All Meyer Sound products must be used in accor-
dance with local, state, federal, and industry regulations.
It is the owner’s and/or user’s responsibility to evaluate
the reliability of any mounting method for their application.
Mounting should be done only by experienced professionals.
HM-1 weighs 11.0 lb (5.0 kg)
11.0
8.4
6.8
8.4
0.6 0.7
8.4
8.4
1.5
12.3
17.5
9.3
Meyer Sound Germany Gmbh
Carl Zeiss Strasse 13
56751 Polch, Germany
Telephone: 49.2654.9600.58
FAX:
49.2654.9600.59