MITSUBISHI ELECTRIC WD-62525 - Manual (Page 53)

52 53
Devices (1394 or IR Controlled)
For NetCommand compatible satellite receivers and
some cable boxes, GUIDE will display the on-screen
programming guide for the receiver or cable box.
Press ADJUST , , or and ENTER to navigate
the displayed Guide. For NetCommand compatible
satellite receivers, you may also be able to use the
number or other additional buttons.
For NetCommand compatible DVD players, GUIDE will
display the DVD disc “top” menu (not the setup menu).
For A/V Discs, pressing GUIDE will display the Track
List screen
For IEEE 1394 devices with digital connections, press
GUIDE twice to display the device’s Guide
ChannelView
Figures 10 and 11
Press GUIDE while viewing Ant-1 or Ant-2 to display
a list of available memorized digital channels (D) and
analog (A) channel information (if available from the
broadcaster). This list is called ChannelView™.
ChannelView for digital channels will show the major
and sub-channels (or bitstreams). Analog channel
information will display as sent. Press ADJUST or
to page through the all the channels in memory, one
by one. To page through the choices quickly, press CH
or .
The information on this screen is sent by the
broadcaster. If limited data is shown or no program
data appears, it is because the broadcaster is not
sending the information. This is not a defect of your
TV. See Troubleshooting for information regarding
failed recordings.
Using the GUIDE Button to Display ChannelView™ and Menus
Figure 10. ChannelView screen, current programs
To record a current program, press REC (record) when
your program choice is highlighted on the program
list in ChannelView. A red “R” will be added before
the program time and name. The TV will immediately
switch to the selected channel and start recording.
To record a future program, press ADJUST or
to select the channel you want to record from. Press
INFO to see the upcoming programs for that channel.
Press ADJUST or to move to your program
choice. Press REC (record) when your choice is
highlighted in ChannelView. A red ”R“ will be added
after the input name. The message, “The recording has
been added to the Record List” will display. To view,
change or cancel the recording, use the Record List
(page 55). The program you selected will be on that
list.
For complete ChannelView information to be
refreshed daily, the TV must be powered Off
between 5 to 15 minutes a day, depending on the
number of channels in memory. If the TV loses
power, the program listings will be temporarily
lost.
IMPORTANT
Figure 11. ChannelView screen, future programs
The GUIDE Button
Depending on the device you are currently viewing, pressing GUIDE allows you to see different program guides or
menus.
Device Selection Menu
For compatible traditional VCRs, pressing GUIDE when
the VCR is highlighted on the Device Selection menu
will change the VCR’s input.
When the A/V Receiver icon is highlighted in the Audio
Section, pressing GUIDE switches the A/V Receiver
from analog audio to digital audio and vice versa.
Record To List
When in the Record To menu, pressing GUIDE will
display the current list of programmed recordings.
Please see Record List, page 55 for more infomation.