MITSUBISHI ELECTRIC WD-62525 - Manual (Page 96)

96 97
Appendix H: Lamp Cartridge Replacement, continued
Replacing the Lamp Cartridge
Tool needed: Phillips screwdriver
1. Turn the television off and unplug the AC cord.
2. Remove the front speaker grill by gently pulling
on each side. The grill will snap out.
3. Using a phillips screwdriver, remove the three
screws (one on the left and two on the right side)
that hold the recessed plastic cover in place.
4. Remove the plastic cover and set aside
with the screws.
5. After removing the cover, you will be able to
see the lamp cartridge. With the screwdriver,
loosen the three screws of the cartridge.
The three screws will not completely remove .
6. Gently grasp the metal handle and pull
straight out (towards you).
7. Insert the new lamp cartridge securely
into the TV. Do not touch the glass surface
of the cartridge.
8. With the screwdriver, tighten the screws
on the lamp cartridge.
9. Replace the plastic cover and screws.
10. Snap the speaker grill back into place
by pushing it into place on each side
with the palm of your han
d.
2.
2.
3.
4.
screws
handle
5.
6.
To order a replacement lamp cartridge, part number 915P020010, call (800) 553-7278.