Surface cooking, Surface controls pilotless ignition – Maytag MGS5875BDW User Manual

Page 6

Advertising
background image

5

Surface Controls

Pilotless Ignition

Pilotless ignition eliminates the
need for a constant standing
pilot light. Each surface burner
has a spark ignitor. Use care
when cleaning around the
surface burner.

If the surface burner does
not light, check if ignitor is
damaged, soiled or wet.

Setting the controls:

The size and type of cookware will affect the heat setting.

1. Place a pan on the burner grate.

The burner flame may lift off or appear separated from
the port if a pan is not placed on the grate.

2. Push in and turn the knob counterclockwise to the Light

setting.

A clicking (spark) sound will be heard and the burner
will light. (All of the ignitors will spark when any surface
burner knob is turned to the Light position.)

3. After the burner lights, turn knob to desired flame size.

The ignitor will continue to spark until the knob is
turned past the Light position.

Operating Surface Burners
During a Power Failure

Surface Control Knobs

Use to turn on the surface burners. An infinite choice of heat
settings is available from Low to High. At the High setting a
detent or notch may be felt. The knobs can be set on or
between any of the settings.

Graphics next to the knob identify which burner the
knob controls. For example, the graphic at
right shows the left front burner location.

CAUTION

• If flame should go out during a cooking operation, turn

the burner to OFF. If a strong gas odor is detected,
open a window and wait five minutes before relighting
the burner.

• Be sure all surface controls are set in the OFF position

prior to supplying gas to the range.

NEVER touch cooktop until it has cooled. Expect some

parts of the cooktop, especially around the burners, to
become warm or hot during cooking. Use potholders to
protect hands.

CAUTION

When lighting the surface burners, be sure all of the
controls are in the OFF position. Strike the match first and
hold it in position before turning the knob to Light.

1. Hold a lighted match to the desired surface burner head.

2. Push in and turn the control knob slowly to Light.

3. Adjust the flame to the desired level.

Surface Cooking

High: Use to bring liquid to a boil, or reach
pressure in a pressure cooker. Always
reduce setting to a lower heat when liquids
begin to boil or foods begin to cook.

An intermediate flame size is used to
continue cooking. Food will not cook any
faster when a higher flame setting is used
than needed to maintain a gentle boil.
Water boils at the same temperature
whether boiling gently or vigorously.

Medium to Low: Use to simmer
foods and keep foods warm. Some
cooking may take place on the Low
setting if the pan is covered. It is
possible to reduce the heat by
rotating the knob toward OFF. Be
sure flame is stable.

Advertising