Setting up a usb driver in windows xp – Motorola SBV4200 User Manual

Page 26

Advertising
background image

License

21

SURFboard

®

SBV4200 VoIP Cable Modem User Guide

X

Home

Print

Exit

Introduction

Before You Begin

Installation & Configuration

FAQ

Troubleshooting

Glossary

Setting Up a USB Driver in Windows XP

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB
connection, the Found New Hardware Wizard window is displayed.

1

Be sure “Install the software automatically” is selected.

2

Click Next. Windows automatically searches for the correct USB drivers and installs
them. If the installation is successful, the window at bottom left is displayed.

3

Click Finish to complete the installation. Otherwise, be sure the SURFboard VoIP
Cable Modem
CD-ROM is correctly inserted in your CD-ROM drive.

When you finish setting up the USB driver, you can continue with

“Configuring TCP/IP”

on page 22.

.

Although your SURFboard VoIP cable modem model number
may be different than in the images in this guide, the
procedure is the same.

Advertising