Motorola SBV4200 - Manual (Page 9)

License
4 SURFboard ® SBV4200 VoIP Cable Modem User Guide X
Home Print Exit
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary
Before You Begin
Before you begin the installation, check that you received the following items with your
SURFboard VoIP cable modem:
You will need 75-ohm coaxial cable with F-type connectors to connect your VoIP cable
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may
need a 5-900 MHz RF
splitter and two additional coaxial cables to use both the TV and
the VoIP cable modem. The coaxial cable and RF splitter are available at consumer
electronic stores.
Item Description
Power adapter
or cable The SBV4200 is supplied with one of the following
powering options:
■ A power adapter to connect to the power outlet
■ A power cable to connect to an UPS
10/100Base-T
Ethernet cable Connects to the Ethernet port
USB cable Connects to the USB port
SURFboard VoIP
Cable Modem
CD-ROM Contains the User Guide and USB drivers
Caution
To comply with all national safety
regulations, do not route the USB,
Ethernet, or telephone cables
outside of the building.