Memorex MX9790 - Manual (Page 4)

RADIO WAKE UP FUNCTION PROGRAMMING THE CD PLAYER
The programming of the CD player should be done during STOP mode.
Select the desired radio station and set the volume to the desired level and
make the following steps:
1. Press the PROGRAM button to begin programming the CD player;
2. Press SKIP or SKIP buttons, to select desired track;
1. Slide the Function Switch to auto position;
3. Press PROGRAM button again to store this track in memory; 2. Press the ALARM ON/OFF button once to activate the alarm
function and the display will show "((((( • "indicating that the alarm is
ON and press the ALARM ON/OFF button again to cancel; 4. Repeat steps from 2 to 3 to store more tracks in memory. You can store a
maximum of 19 tracks in the memory.
5. Press PLAY/PAUSE button to play the disc in the programmed order; 3. Set the alarm time as indicated at the SET ALARM TIME section
and the unit’s radio will turn on at the pre-selected time. 6. To stop playing, press STOP;
7. To cancel the programming, press STOP button and open the CD player
door or select a different function (OFF/RADIO etc.) BUZZER WAKE UP FUNCTION
Follow the same instructions as for Radio Wake up Function, but slide the
Function Switch to Alarm position. The buzzer will sound for 3 minutes.
REPEAT FUNCTION
To repeat the same track:
- Press REPEAT button before or while playing the song. The REPEAT
symbol "
" will light up on the display.
CD PLAYER OPERATION
To play a CD, please follow the steps underneath:
To repeat the whole disc: 1. Set the Function Selector to the CD position;
- Press REPEAT button twice. The REPEAT symbol " " will light up on
the display.
2. Press the OPEN button in order to open the CD door;
3. Insert the CD with the printed side facing up and close the CD door;
4. Disc information (total number of tracks) will appear on the LED
display;
To cancel the repeat function:
- Press REPEAT button three times. The REPEAT indicator will be cleared
from the display.
5. Press PLAY/PAUSE button to start playing the CD;
6. Adjust the volume control to the desired volume level;
7. Press STOP, to stop playing the CD
PAUSE FUNCTION
1. While playing a CD, press PLAY/PAUSE button once to temporarily pause
the play.
SKIP DURING PLAY MODE
1. Press SKIP button once to skip to the beginning of the next track;
2. Press PLAY/PAUSE button again to resume play.
2. Press SKIP button once to skip to the beginning of the correct
track;
REMOTE CONTROL OPERATION
3. Press SKIP twice quickly in succession to go back to previous
tracks.
Open the Battery Compartment Door and insert two pieces "AAA" size batteries into
the battery compartment with battery polarity as shown inside the battery
compartment.
SEARCH DURING PLAY MODE
Point the remote control at the remote sensor. The functions of the buttons on the
remote control are same as the corresponding controls on the main unit.
1. Press and hold the search buttons to quickly advance or reverse
through the music at high speed;
2. Release the SEARCH button to return to normal play mode.
- 5 -
- 6 -