Mace DVR-9404 User Manual
Page 123
Chapter 7 WebCam System
The G-View is a remote monitoring application for Pocket PC device. It can run on any PDA
using Windows CE operating system. With G-View, you will be able to monitor your
GV-Systems while on the move. This section will explain the setup and function of the
G-View application in detail.
G-View Application Setup
The G-View application is included in your GV-System CD-ROM. This application should be
installed in a PDA device with Windows CE OS.
1.
Plug your PDA via USB or Com port to a PC installed with Microsoft ActiveSync.
2.
Run Microsoft ActiveSync in the connected PC and make sure both the PDA and PC are
synchronized.
3.
Insert GV-System CD into the CD-ROM drive of the PC and run Setup.exe in the
CD-ROM root directory.
4.
In the setup dialog box select “PDA Viewer for WinCE” and click [Next].
5.
Click [Browse] if you wish to specify another destination directory otherwise click [Next]
and follow the rest of the instruction to complete the installation.
Start and stop G-View application.
Once G-View is properly installed into your PDA device you will be able to use it to monitor
Page 118
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE