Mace DVR-9404 - Manual (Page 41)

Chapter 3 Main System Application
Select I/O Module
Select Com Port
Select Address
Format Address
Add Button
Module List Window
[Input Configuration]:
If you have PT811 module connected and is properly setup within your system, then you will
be able to configure its functions in the input configure area. Each PT811 can connect up to 8
input devices. You may use the [Input Select Button] to choose the device you wish to
configure.
Input Select Button
Apply All
Select Hotline or Email
Choose Alarm Type
Select Camera
Recording Delay
Select Output Address
Name: You can specify a name for each input device in the Name text column.
Signal Type: Select signal type for your input device. You may use the [Apply All]
button to apply your selection to all input devices.
Rec Video: Check this option if you wish to use this device to trigger recording
(sensors or detectors). You may select which camera to record in the
Camera Select drop down menu and specify the recording delay.
Page 36
DVR-9404~9408~9416 Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE