Motorola XTNID - Manual (Page 12)

10 English
RADIO OV
ERVIEW
• Programmable Button
Default set to generate the current
programmed call tone.
• Programmable Button
Default set to preset channel 1
• Programmable Button
Default set to preset channel 2
Note: A short press of either preset button (B or C)
tunes the radio to the preset channel and the
radio will play a good chirp. You can assign
different functions to these buttons via the
CPS. For example: Backlight Time Out,
Reverse Burst, Power Select, Scan/
Nuisance Channel Delete, Monitor and Call
Tones. To learn more about how to program
these buttons refer to “Entering
Programming Mode” on page 38 and “CPS
(Computer Programming Software)” on
page 48.
Side Buttons
• Push-to-Talk (PTT) Button
Press and hold down this button to talk,
release it to listen.
• Side Button 1 (SB1)
The Side Button 1 is a general button that can
be configured by the CPS. The default setting
of the SB1 button is "Monitor".
• Side Button 2 (SB2)
The Side Button 2 is a general button that can
be configured by the CPS. The SB2 button
default setting is ‘Scan/Nuisance Channel
Delete’.
The Lithium-Ion (Li-Ion) Battery
XTNi™ Series provides different types of
batteries. For more information, see “Battery
Features and Charging Options” on page 12.
A
B
C