Motorola XTNID - Manual (Page 52)

50 English
PR
OGRAMMING FEATURES
CLONING RADIOS
You can copy XTNi™ Series radio profiles from
one Source radio to a Target radio by using:
1. One Multi Unit Charger (optional
accessory)
2. Two single unit chargers and a Radio-to-
Radio cloning cable (optional accessory)
3. the CPS
Cloning with a Multi-Unit Charger (MUC)
To clone radios using the MUC, there must be
at least two radios:
• a Source radio(radio to be cloned) and
• a Target radio (radio to which the
configuration of the “source radio” will be
copied or cloned)
The Source radio has to be in Pocket 1, 3 or 5
while the Target radio to be cloned has to be in
Pockets 2, 4 or 6, matching the MUC’s pockets
by pairs as follows: 1 and 2 or 3 and 4 or 5 and
6.
When cloning, the MUC does not need to be
plugged into a power source, but ALL radios
require charged batteries.
Follow cloning instructions explained in pages
51-52 from step 4 through step 8 (take into
account that when instructions refer to “SUC”,
this is equivalent in the MUC instructions to
“pocket”.
Further details on how to clone units are
explained in the instructions sheet provided
with the MUC.
To order the MUC, see “Chargers” on page 65
for the MUC part number.