Voice activation – Motorola MBP35BL User Manual
Page 14
14
MBP35BL, MBP35BW Parent Unit Menu Options
4.4
Voice Activation
If you do not want the parent unit screen to be on continually, you can set
the VOX mode so that the screen only turns on if there is a sound near
the baby unit. The sound detection sensitivity level (VOX) of the Baby
Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level
can be increased so that only minor disturbances will cause the parent
unit screen to turn back on.
1. Press
m
repeatedly until
VOX
appears on the LCD screen.
Press
<
and
>
to adjust the VOX level to
OFF
,
1
,
2
,
3
,
4
or
5
(the default
setting is
OFF
).
When the VOX function is on (level
1
to
5
), the Voice Activation LED
will be turned on, and the LCD screen will switch off after a few seconds
if the detected sound is below the level selected.
Note: Level
5
is the most sensitive and so will need to be the quietest
before the LCD will switch off.
2. Press
m
repeatedly to exit.
NOTE
When the Voice Activation function is on, the voice Activation LED will be
turned on (red) and the display screen will switch off after a few seconds.
The LCD screen on the parent unit will be switched back on when the
sound level of the baby reaches the Voice Activation threshold or when
any key on the parent unit is pressed.
)
)
)