Miele EGW 2060 - Manual (Page 2)

Installation Safety Instructions
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond in order to avoid risk
of damage to the appliance. If in doubt,
consult a qualified technician.
The electrical outlet should be
easily accessible after the unit is
installed.
Only install the plate warmer in
combination with other built-in
appliances recommended by the
manufacturer. If installed with
appliances not recommended, the
warranty is void since the manufacturer
cannot guarantee its safety.
To install the plate warmer in
combination with another
appliance, a built-in shelf must exist in
the cabinet to support the weight of
both appliances.
When installed in combination with
another appliance, the plate
warmer must always be installed
beneath the other appliance. The
combination appliance can be set
without a base directly onto the plate
warmer. A shelf between the
appliances is not necessary.
To install the combination
appliance please read the manual
supplied with that machine.
This appliance is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the Miele Technical
Service Department with specific
requirements.
Installation
15