Miele EGW 2060 - Manual (Page 5)

Installing the appliance
^ Set the plate warmer into the niche,
push is all the way in and align it at a
right angle.
^ Open the drawer and fix the
appliance with the two supplied
screws at the side panels of the
cabinet.
^ Install the combination appliance
regarding the manual supplied with
that machine.
Aligning the appliance front
After installing the combination
appliance it may be necessary to align
the appliance front and/or even the gap
between the plate warmer and the
combination machine.
Flat washers are supplied beneath the
knurled nuts, which fix the drawer to the
telescopic runners.
^ Loosen the knurled nuts and take the
drawer out.
^ Align and even the gap with the flat
washers by changing their position
(above or below the drawer), on both
sides.
Installation
18