MACKIE RTA-31 - Manual (Page 23)

User’s Guide
23
Inserting a Plug-in into a Channel
A pre- or post-DSP channel insert can also be used as the input
source for a plug-in. When a channel insert point is selected, the
plug-in output returns to the channel. The FX return path is
disconnected, although the plug-in output is still displayed on
the FX return channel meter.
A plug-in channel insert assignment can be made from the
Plugin Configuration window, or from a pull-down menu from the
mixer screen, or from the RTA-31 front panel.
This assignment can also be made from the control surface and
VFD by holding in the desired channel’s SELECT button for two
seconds, then paging over to Plug Pre or Plug Post, selecting
the input source, then selecting the desired plug-in slot from the
guided menu.
Pre-DSP Pull-down
Plugin Configuration Window
Post-DSP Pull-down