Configuring the ethernet interface, Modifying network settings with the serial console, Configuring the ethernet interface -5 – Moxa Technologies THINKCORE W341 User Manual
Page 14
ThinkCore W311/321/341 Linux User’s Manual
Getting Started
2-5
Linux Users
From a Linux machine, use the “ssh” command to access the W311/321/341’s console utility via
SSH.
#ssh 192.168.3.127
Select yes to complete the connection.
[root@bee_notebook root]# ssh 192.168.3.127
The authenticity of host ‘192.168.3.127 (192.168.3.127)’ can’t be established.
RSA key fingerprint is 8b:ee:ff:84:41:25:fc:cd:2a:f2:92:8f:cb:1f:6b:2f.
Are you sure you want to continue connection (yes/no)? yes_
NOTE
SSH provides better security compared to Telnet for accessing the W311/321/341’s console
utility over the network.
Configuring the Ethernet Interface
The network settings of the W311/321/341 can be modified with the serial console port, or online
over the network.
Modifying Network Settings with the Serial Console
In this section, we use the serial console to configure the network settings of the target computer.
1. Follow the instructions given in a previous section to access the Console Utility of the target
computer via the serial console port, and then type #cd /etc/network to change directories.