Moxa Technologies THINKCORE W341 User Manual
Page 73
ThinkCore W311/321/341 Linux User’s Manual
Managing Communications
4-33
# value after “-net” is the subnet behind the remote peer
route add -net 192.168.2.0 netmask 255.255.255.0 gw $5
#--------------------------------- end -----------------------------
Note that the parameter “ifconfig” defines the first argument as the local internal interface and
the second argument as the internal interface at the remote peer.
Note that $5 is the argument that the OpenVPN program passes to the script file. Its value is
the second argument of ifconfig in the configuration file.
3. Check the routing table after you run the OpenVPN programs, by typing the command:
# route
Destination Gateway
Genmsk Flags
Metric
Ref Use
Iface
192.168.4.174 * 255.255.255.255
UH 0 0
0
tun0
192.168.4.0 192.168.4.174 255.255.255.0 UG
0
0
0 tun0
192.168.2.0 *
255.255.255.0
U
0
0
0
eth1
192.168.8.0 *
255.255.255.0
U
0
0
0
eth0