MITSUBISHI ELECTRIC HD 4000 - Manual (Page 23)

EN-23
ENGLISH
Menu operation
• Menus are not displayed when no signal is supplied to the projector.
* 1: Not available with certain signals.
* 2: Available only when the input signal is TV50, TV60, 480i, or
576i.
* 3: Available only when the input signal is from the VIDEO IN or
S-VIDEO IN terminal.
* 4: Setting range differs depending on the input signals.
* 5: Not available when the input signal is from the VIDEO IN or
S-VIDEO IN terminal.
IMAGE
CONTRAST ±30
BRIGHTNESS ±30
9300K
6500K
5900K
USER
COLOR ±10
TINT ±10
SHARPNESS ±5
GAMMA MODE
CONTRAST B ±30
BRIGHTNESS R ±30
CONTRAST R ±30
CONTRAST G ±30
BRIGHTNESS G ±30
BRIGHTNESS B
REFERENCE
HIGH
MID
LOW
±30
±5
±5
±5
SCREEN SIZE WXGA(15:9), 720P(16:9), XGA(4:3), CINEMA SCOPE(2.35:1)
AUTO POWER ON ON , OFF
VERTICAL LOCATION ±26
USER1
USER2
RESET ALL OK
AUTO POWER OFF
MENU POSITION 1 (Upper left), 2(Lower right)
TEST PATTERN CROSS HATCH
LAMP MODE
ASPECT
DISPLAY INPUT ,MENU ACCESS
ON, OFF
AUTO, OFF, 3.75%, 7.5%
VIDEO SIGNAL
LANGUAGE , English, Español, Deutsch, Français, Italiano, , , ,
SIGNAL HORIZ.POSITION
HOLD
0 - 999
0 - 999
FINE SYNC. 0 - 31
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - 255
CLAMP WIDTH 1 - 63
VERT.SYNC AUTO, OFF
*4 *6
*6
*5,*6
*1*,5,*6
*1*,5,*6
AUTO , OFF CINEMA MODE
*6,*7
*6
*6
*1
*1
*1
*1
*1
*5
*4
*4
ON
BEGIN 0 - 99
END 0 - 99
OFF
COMPUTER INPUT
*4
*4
*4 OVER SCAN 100 - 90%
LPF ON, OFF
SHUTTER (U) 0 - 38
SHUTTER (L) 0 - 38
SHUTTER (LS) 0 - 95
SHUTTER (RS) 0 - 95
TRIGGER OUT ON , OFF
OK
OK
UNLOCK OK
LOCK
*1,*6
*1,*6
*1
BrilliantColor TM 0 - 2
*2
*4
*3
*1,*6
*8
HIGH BRIGHTNESS
SPORTS, VIDEO, CINEMA
AUTO , NTSC , PAL , SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
AUTO, 4:3, 16:9, ZOOM1, ZOOM2, STRETCH, REAL
AUTO, SPORTS, VIDEO, CINEMA
PASSWORD FUNCTION
SCART INPUT
SET UP
INSTALLATION
FEATURE
COLOR TEMP.
VERT.POSITION
STANDARD, LOW
OFF, 5, 10, 15, 30, 60min
AUTO, RGB, YC
B
C
R
/ YP
B
P
R
ON , OFF
IMAGE REVERSE
SPLASH SCREEN
BLUE, BLACK BACK COLOR
OFF, MIRROR, INVERT, MIRROR INVERT
AUTO, OFF *8 WXGA
* 6: Not available when the input signal is from the HDMI IN terminal.
* 7: Available only when the input signal is 480i, 480p, 576i, or 576p.
* 8: Available only when the input signal is from the COMPUTER IN/COMPONENT VIDEO IN terminal.