MITSUBISHI ELECTRIC HD 4000 - Manual (Page 24)

EN-24
How to set the menus:
The following describes how to set AUTO POWER OFF
time as an example.
1. Press the MENU button.
• When no signal is applied, the menu would not
appear.
2. Press the or button to select a menu to use.
3. Press the ENTER button (or button).
IMAGE
SVGA60
opt.
AV MEMORY 1
INSTALLATION
SVGA60
opt.
AV MEMORY 1
SCREEN SIZE
INSTALLATION
SVGA60
WXGA (15:9)
VERTICAL LOCATION 0
opt.
AV MEMORY 1
4. Press the or button to select an item to ad-
just.
5. Set the selected item by pressing the or but-
ton.
To cancel the menu:
6. Press the MENU button several times.
Important:
• When the MENU button doesn’t function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with , press the
ENTER button.
OFF
AUTO POWER
ON
OFF
AUTO POWER
OFF
30 min
AUTO POWER
ON
OFF
AUTO POWER
OFF
CONTRAST
IMAGE
0
BRIGHTNESS 0
0
COLOR
1
0
SVGA60
TINT
0 SHARPNESS
COLOR TEMP.
BrilliantColor TM
opt.
AUTO GAMMA MODE
AV MEMORY 1
6500K
IMAGE
REVERSE
OFF
OFF
SCREEN SIZE
BACK COLOR
OFF
TEST PATTERN CROSS HATCH
SVGA60
720P(16:9)
VERTICAL
LOCATION
0
opt.
STANDARD LAMP MODE
AV MEMORY 1
AUTO POWER
ON
AUTO POWER
OFF
INSTALLATION
TRIGGER OUT OFF
ON ON
BLUE
SPLASH
SCREEN
FEATURE
AUTO
SVGA60
AUTO
AUTO
opt.
MENU POSITION
CINEMA MODE
VIDEO SIGNAL
?
ASPECT
RESET ALL
English LANGUAGE A Ë
OFF
AUTO
OK
DISPLAY INPUT
PASSWORD
FUNCTION
1.
AV MEMORY 1
SET UP
AUTO WXGA
SCART INPUT
WXGA
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu 2. INSTALLATION menu 3. FEATURE menu
1. IMAGE menu
ITEM SETTING
FUNCTION
GAMMA MODE AUTO The proper gamma mode is automatically selected depending on the input
signal. Default is AUTO.
SPORTS This is a bright mode suitable for watching sports images.
VIDEO This is a standard mode suitable for watching video images etc.
CINEMA This is a mode for watching movies in dim lighting as in a theater.
USER1 / USER2 Select to adjust the gamma curve. (See page 28.)
CONTRAST ±30 Use to adjust the contrast of the projected image. (See page 27.)
BRIGHTNESS ±30 Use to adjust the brightness of the projected image. (See page 27.)
COLOR TEMP. 5 options Use to adjust the color temperature. (See page 28.)
COLOR ±10 Use to adjust the color thickness of the projected image. (See page 27.)
TINT ±10 Use to adjust the color tint of the projected image. (See page 27.)
SHARPNESS ±5 Use to adjust the sharpness of the projected image. (See page 27.)
BrilliantColor TM 0 - 2 Use to adjust the BrilliantColor TM function. When set to 0, BrilliantColor TM
doesn't work.
• BrilliantColor TM uses BrilliantColor TM technology of Texas Instruments in USA. When you set this item to 1 or 2, the
projector displays higher resolution images while reproducing superior colors.
• By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See
page 26.)
Menu operation (continued)