Miele F 9212 i - Manual (Page 32)

Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand door
hinging is required, follow the
instructions below.
To change the door hinging, you will
need various sizes of Torx
screwdrivers and a slotted
screwdriver.
Appliance door
^ Open the appliance door.
^ Pull off covers a and b.
^ Unscrew hinge pin c.
^ Tilt the door, and lift it off.
^ Unscrew hinge plate d, and replace
it on the opposite side using the
same screws.
^ Remove lower hinge pin e together
with washer f, and replace these on
the opposite side.
^ Replace the appliance door on lower
hinge pin e.
^ Insert upper hinge pin c into the
outer hole in hinge plate d, and
screw securely into the top of the
door.
^ Replace covers a and b on the
opposite side, turning them by 180 °.
Changing the door hinging
32