Playing a cd, Changing the time display, Stopping playback – Marantz PMD330 User Manual

Page 12: Playing a cd again from the first track, Removing a disc

Advertising
background image

8

ENGLISH

FRANCAIS

DEUTSCH

NEDERLANDS

ESP

ANOL

IT

ALINO

POR

T

UGUES

SVENSKA

D

ANSK

D

ANSK

SVENSKA

POR

TUGUES

IT

ALINO

ESP

ANOL

NEDERLANDS

DEUTSCH

FRANCAIS

ENGLISH

Changing the Time Display

Pressing the

TIME

button u cycles the time display through

the following modes:

Playing Time Display Example

Track Remaining Time

Track Elapsed Time

Disc Remaining Time

Playing a CD

Track Remaining Time

Track Elapsed Time

Disc Elapsed Time

Disc Remaining Time

Disc Total Time

Searching (Searching for a Desired Position

in a Track)

-

While playing or in pause, press the

button !8 to scan in

the forwards direction.

-

While playing or in pause, press the

button !6 to scan in the

reverse direction.

<During playback>

Searching

For the first three seconds after the

button !6 or the

button !8 is held down, the CD player scans at slow speed

(about 2x normal playing speed).

For the next three seconds, the CD player scans at medium

speed (about 4x normal playing speed).

After that, the CD player scans at high speed (about 16x nor-

mal playing speed).

<During pause>

Frame Searching

If the

button !6 or the

button !8 is pressed once, the

play position moves one frame.

If the

button !6 or the

button !8 is held down, the search

speed changes through three stages after every three sec-

onds, until a maximum speed of 75 frames per second (about

1x normal playing speed) is reached.

Tip:

One frame contains data for about 1/75 of a second of play-

back.

Turning the PITCH/SEARCH dial

@0

has the following effect

(PMD331/PMD340 only):

<When paused>

Frame Searching

-

Each time the

PITCH/SEARCH

dial @0 is turned clockwise,

the play position advances one frame.

-

Each time the

PITCH/SEARCH

dial @0 is turned counterclockwise,

the play position reverses one frame.

-

If the

PITCH/SEARCH

is turned quickly, the search speed

changes through three stages until a maximum of 75 frames

per second is reached.

Tip:

One frame contains data for about 1/75 of a second of play-

back.

Stopping Playback

Press the button !3.

Playing a CD Again from the First Track

Press the

button !7.

Removing a Disc

Press the button y to open the

disc tray

w, and then remove

the disc. Press the button y again to close the

disc tray

w.

Note:

Always close the disc tray

w

when it is not in use.

Tips:

- There is an “Auto Close” feature for the disc tray

w

. In the

Preset menu, set one of the following for “Auto CLS: OFF
(initial value), 10 seconds, 30 seconds, 60 seconds, or 180
seconds.

- If “Tray Lock:” is displayed and the tray does not open even if

the button

y

is pressed while a track is playing or while

paused, the tray lock setting is set to “On” (initial value). The

setting can be cancelled by switching No.11 “Tray Lock:” on

the Preset menu to “Off:.”

Disc Elapsed Time

Disc Total Time

Advertising
This manual is related to the following products: