Mitel 5235 - Manual (Page 40)

5235 IP Phone SIP User and Administrator Guide
- 34 -
Voice Mail
Voice mail for SIP-supported phones is server-based. For more information on the voice
mail system, contact the SIP Service Provider.
To configure voice mail on the 5235 IP Phone, access the SIP Configuration page of the
Web Configuration Tool or use the procedure below.
Configuring Voice Mail
To configure voice mail:
1. Press Superkey, and then press >> until ADMIN TOOLS? appears.
2. Press OK, and then press Next until NETWORK SETTINGS? appears.
3. Press OK, enter your administrator password, and then press SUBMIT.
4. Press NEXT until VOICE MAIL SERVER appears, and then press REVIEW.
5. Press CHANGE, enter the IP address of the voice mail server, and then press
SUBMIT. After the information is saved, VOICE MAIL SERVER appears.
6. Press NEXT. VOICE MAIL PORT NUM appears.
7. Press REVIEW, and then press CHANGE.
8. Enter the voice mail port number, and then press SUBMIT. After the information is
saved, VOICE MAIL PORT NUM appears.
9. Do one of the following:
• To return to the main menu, press EXIT.
• To return to the default display, press Superkey.
Adjust Daylight Savings
• Access
the Network Configuration page of the Web Configuration Tool.
Configuration Files
The 5235 IP Phone supports configuration files for automatic programming. For
information about the configuration files, and about configuring multiple phones, access
the Administrator Tools > Phone Management topic in the Administrator’s Web
Configuration Tool online help.
Hot Line
When a Hot Line number, SIP URL or an IP address is set up, the 5235 IP Phone
automatically dials that number or address when taken off-hook.
For Hot Line programming instructions, access the Administrator Tools > Configuring
SIP Features section in the Administrator’s Web Configuration Tool online help.