Channel menu, Channel, Antenna – MITSUBISHI ELECTRIC WD-73827 User Manual

Page 72: Prefer digital, Name

Advertising
background image

72

Chapter 5. TV Menu Operations

Channel

Figure 17

Figure 17. Channel Menu

Antenna

Select the antenna for the channels you want to edit. You
can select Ant-1 (main) or Ant-2 (Aux).

Prefer Digital

When a memorized channel number is available as both
analog and digital, a check mark in the Prefer Digital

box causes digital channels to be displayed and analog
channels to be hidden (when using CH or ). Remove
the check mark to show both analog and digital choices.

This option is not available when TV Guide On Screen® is

enabled.

Channel

Channels can be changed in three ways:

• Press ADJUST or to select the channel.

• Pressing CH or to select channels already in

memory.

• Enter the number directly. Channel numbers can be

one part, analog or digital (up to the number 16383), or
two part for digital channels (these use a separator).
For a two-part digital channel, press SUB/CANCEL on
the remote to enter a separator after the first, second
or third number, depending on the broadcaster’s
channel information.

For digital channels, when the broadcaster has sent
a virtual channel number, the virtual channel number
is shown in the text box and the original digital
channel is shown below on screen as a reference.
One original channel number can be associated with
several different virtual channels.

Channel Menu

Memory

After the available channels have been memorized

with Memorize Channels on the Setup menu, weaker
channels can be added or unwanted channels can be
deleted. Press CH or on the remote control to see
the channels in memory. Press ADJUST or to select

Added or Deleted for the channel shown in the Channel

number box.

Name

Analog channels shown on Antenna-1 or Antenna-2

can be named (up to four characters). After you enter a

name, it will appear on the TV screen, next to the channel
number.

1. Press ADJUST or to select each letter.

2. Press ENTER to set the letter and move to the

next letter position.

3. Press CANCEL to move back one position.

Digital channels are automatically named if the
broadcaster sends the information.

Advertising
This manual is related to the following products: