Miele M 635 EG - Manual (Page 22)

Starting a process
Use the appropriate selector to choose
the microwave power setting and the
time. It does not matter which is chosen
first.
^ Turn the power selector to the re-
quired setting.
h lights up in the display and 0:00
flashes.
^ Set the required time using the time
selector.
Any time of between 5 seconds and
60 minutes can be selected.
^ Press the START button to start the
process.
The interior lighting comes on.
A programme can only be started if the
door is closed.
Interrupting a process /
Re-starting a process
Programmes can be interrupted and
re-started at any time.
^ To
interrupt a process, press the
Stop/C button once or open the ap-
pliance door.
The time stops counting down.
^ To
continue the process, close the
door and press the START button.
The process continues.
Altering settings
If you discover after starting a process
that
. . . the microwave power setting is
too high or too low, you can
^ select a new setting.
. . . the time set is too short or too long,
you can
^ interrupt the process (press the
Stop/C button once), use the time se-
lector to set a new time and continue
the process (press the START but-
ton).
To cancel a process
Press the Stop/C button twice.
At the end of a process
An audible tone will sound when the
cooking process is complete. The oven
interior lighting goes out.
Operation
22