Memorex MCD4300BT - Manual (Page 15)

14
BASIC OPERATION
PLACING A CALL
After the battery has been fully charged,
press the Key buttons (0-9)
❶ for the
phone number you wish to call.
NOTE: Press the REDIAL button
❷
to insert a pause. A pause is a two
second interval between numbers.
2
1
1
Press the TALK button to dial the
number you entered. You can also
press the TALK button first and then
dial the number.
The display will show the amount of
time you have been on the phone.
2
ENDING A CALL
To end a call, simply return the
handset to the base, or press the
TALK button on the handset.
1
USING THE REDIAL BUTTON
Press the TALK button ❶, followed by
the REDIAL button ❷ to automatically
redial the last number dialed on this
handset. You can also press the
REDIAL button ❷ first, and then the
TALK button ❶.
NOTE: Please note that only the last
number you called on this handset can
be stored in the Redial memory.
2
1
1
NOTE: When dialing a number, the
other buttons (except TALK, CLEAR
and the Key buttons) will not work. To
use these other buttons, or to cancel
the entering of the telephone number,
simply press and hold the CLEAR
button for two seconds.
MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 14