Metrologic Instruments MS9535 - Manual (Page 36)

32
D ESIGN S PECIFICATIONS
O PERATIONAL
Light Source: Visible Laser Diode 650 nm ± 10 nm
Laser Power: 0.96 mW (peak)
Depth of Scan Field:
0 mm – 203 mm (0” – 8”) for 0.330 mm (13 mil) bar code at
default setting
Scan Speed: 72 ± 2 scan lines per second
Scan Pattern: Single scan line
Minimum Bar Width: 0.127 mm (5.0 mil)
Decode Capability:
Autodiscriminates all standard 1D bar codes
(For others call a Metrologic service representative)
System Interfaces:
RS232/Light Pen, PC Keyboard Wedge, Stand-Alone Keyboard,
USB (keyboard and full speed), IBM
Print Contrast: 35% minimum reflectance difference
Number of Characters
Read:
Up to 80 data characters
(Maximum number will vary based on symbology & density)
Roll, Pitch, Yaw: 42°, 68°, 52°
Beeper Operation: 7 tones or no beep
Indicators (LED)
Default Settings:
Blue = laser on, ready to scan; White = good read;
Amber = battery full
M ECHANICAL
Length: 198 mm (7.8”)
Width: Handle - 45 mm (1.8”), Head - 78 mm (3.1”)
Depth: 40 mm (1.6”)
Weight: Scanner: 199 g (7.02 oz) Cradle: 225g (7.94 oz)
E LECTRICAL
Input Voltage:
Scanner: 5.2VDC ± 0.25V
Cradle: 5.2VDC ± 0.25V
Power:
Scanner: Operating = 1.15 W, Sleep = 150 mW
Cradle: 0.6 W
Current:
Scanner:Operating=230 mA@5VDC, Sleep=30mA@ 5VDC
Cradle: 120 mA @ 5VDC
DC Transformers: Class II; 5.2V @ 2A
Laser Class 1:
IEC 60825-1:1993+A1:1997+A2:2001
EN 60825-1:1994+A11:1996+A2:2001
EMC:
FCC, ICES-003 & EN55022 Class B
FCC, ICES-003 & EN55022 Class A for FS USB, IBM
Battery Capacity
/Recharge Time:
12000 scans per charge / recharge time = 2.5 hours
Radio Range: 10 m (33 ft)
E NVIRONMENTAL
Temperature:
Operating = 0°C to 40° (32° to 104°F)
Storage = -20°C to 50°C (-4°F to 122°F)
Humidity: 5% to 95% relative humidity, non-condensing
Light Levels: Up to 4842 Lux (450 footcandles)
Shock: Designed to withstand 1.5 m (5’) drops
Contaminants: Sealed to resist airborne particulate contaminants
Ventilation: None required