When to use the automatic locking mode, Seating and safety restraints – Mazda 2008 B2300 Truck User Manual

Page 78

Advertising
background image

movement. For example, if the driver brakes suddenly or turns a corner
sharply, or the vehicle receives an impact of approximately 5 mph
(8 km/h) or more, the combination seat belts will lock to help reduce
forward movement of the driver and passengers.

Automatic locking mode (outboard front passenger seating
position only) for use with child safety seats
In this mode, the shoulder belt is automatically pre-locked. The belt will
still retract to remove any slack in the shoulder belt.

The automatic locking mode is not available on the driver seat belt.
When to use the automatic locking mode
Any time a child safety seat is installed in a passenger front seat.

Refer to Safety Restraints for Children or Safety Seats for Children
later in this chapter.

How to use the automatic locking mode (Outboard front passenger
seating position only) for use with child safety seats
• Buckle the combination lap and

shoulder belt.

• Grasp the shoulder portion and

pull downward until the entire
belt is pulled out.

• Allow the belt to retract. As the belt retracts, you will hear a clicking

sound. This indicates the seat belt is now in the automatic locking
mode.

2008 B-Series (mbs)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

78

Advertising