Seating and safety restraints – Mazda 2008 B2300 Truck User Manual

Page 85

Advertising
background image

• The parking brake is set
• The gearshift is in P (Park) (automatic transmission)
• The ignition switch is in the OFF position
• The driver and front passenger seat belts are unbuckled

WARNING: While the design allows you to deactivate your
Belt-Minder

, this system is designed to improve your chances

of being safely belted and surviving an accident. We recommend
you leave the Belt-Minder

system activated for yourself and

others who may use the vehicle. To reduce the risk of injury, do
not deactivate/activate the Belt-Minder

feature while driving

the vehicle.

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT

START THE ENGINE)

2. Wait until the seat belt warning light turns off. (Approximately

1 minute)

• Step 3 must be completed within 50 seconds after the seat belt

warning light turns off.

3. For the seating position being disabled, at a moderate speed, buckle

then unbuckle the seat belt 9 times, ending in the unbuckled state.
(Step 3 must be completed within 50 seconds after the seat belt
warning light turns off.)

• After Step 3, the seat belt warning light will be turned on for three

seconds.

4. Within approximately 7 seconds of the light turning off, buckle then

unbuckle the seat belt.

• This will disable the Belt-Minder௡ feature for that seating position if it

is currently enabled. As confirmation, the seat belt warning light will
flash 4 times per second for 3 seconds.

• This will enable the Belt-Minder௡ feature for that seating position if it

is currently disabled. As confirmation, the seat belt warning light will
flash 4 times per second for 3 seconds, followed by 3 seconds with the
light off, then followed by the seat belt warning light flashing 4 times
per second for 3 seconds again.

2008 B-Series (mbs)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

85

Advertising