MicroNet Technology MAXNAS R8 - Manual (Page 26)

MaxNAS Owner’s Manual 26
It is recommended that you disable services you will not require for security purposes.
See Chapter 4 for details on how to use these technologies in Windows and Macintosh
environments.
3.3.1 SMB/CIFS
The Server Message Block network protocol is the most widely used network protocol. It
is used by all variants of the Microsoft Windows operating system, Apple Macintosh OS X,
and most Unix and Linux variants include support for it even if using a different networking
protocol. You may enable or disable SMB/CIFS support by navigating to “System Network” ->
“Samba/CIFS.” The Samba/CIFS setup page has four key settings:
Samba Service Use this option to enable or disable the Samba/CIFs service. This option is enabled by
default.
File Access Cache File Access Cache improves performance on Samba shares. This option is enabled by
default.
Samba Recycle bin When this enabled, the Samba Recycle Bin is a final resting place for files deleted from
your SMB/CIFS shares. When this option is enabled deleted files/folders will be deposited
in the hidden “.recycle” folder in each share.
Samba Anonymous
Login Authentication
Enable this feature if you intend to require anonymous users to enter a user name and
password to access to your Samba shares. This setting supersedes any shared security
settings.
Click Apply to complete the operation.
3.3.2 Apple File Protocol Services
The AFP protocol is used by Apple Mac OS 9.x and prior for networking and is supported by
all Mac OS-X hosts as well. To enable AFP support navigate to “System Network” -> “AFP.” You
may enable, disable, set the character language set, and specify zone (optional). Click
Apply
to complete the operation.
3.3.3 NFS Services
NFS (Network File System) is a network file system protocol originally developed by Sun
Microsystems in 1983 allowing a user on a client computer to access files over a network as
easily as if the network devices were attached to its local disks. It is most commonly used on
Unix and Linux based networks. You may enable or disable NFS server support by navigating
to “System Network” -> “NFS.” Click
Apply to complete the operation.
3.3.4 FTP Services
FTP (File Transfer Protocol) is a commonly used, open standard protocol for exchanging files
over any network that supports the TCP/IP protocol (such as the Internet or an intranet).
Virtually every computer platform supports the FTP protocol. This allows any computer
connected to a TCP/IP based network to manipulate files on another computer on that
network regardless of which operating systems are involved (if the computers permit FTP
access.) There are many existing FTP client and server programs, and many of these are free.
You may enable or disable FTP server support as well as related service options by navigating
to “System Network” -> “FTP.” The following table describes the available settings:
3-Administering the MaxNAS R8