MicroNet Technology MAXNAS R8 - Manual (Page 52)

MaxNAS Owner’s Manual 52
username and password. Click OK to commit CHAP authentication, and OK on the
iSCSI Initiator properties window.
Enable CHAP
4.1.5. Open the disk management console. A list of the
attached drives and their respective volumes will appear.
Each Volume set will appear as an individual disk in the
management console. Upon the first time the MaxNAS
R8 iSCSI volume is connected, an “Initialize and Convert
Disk Wizard” should appear when the disk management
console is run. You may use the Wizard to set up the
volume or follow the next steps for manual configuration.
4.1.6 Right-click on the iSCSI volume. If it’s not initialized a red “No Entry” logo will cover the disk
icon. Right click on the disk and
select “Initialize Disk.” Follow the
on-screen instructions.
4.1.7 Right click the initialized
volume (The area right of the
disk icon.) In the context menu
select “New Partition.” Follow the
on screen instructions. In the File
System pop-up menu, select NTFS.
The default formatting option is
Note:
The Disk Management Console
can be found under \Windows\
System32\diskmgmt.msc on your
system drive. For an illustrated guide,
please see
http://www.fantomdrives.
com/support/faqs/hdfaqpc.php4#8
3.1.6
3.1.7
4-Connecting Users