Activating progressive scan mode, System setup (dvd) – Philips Magnavox mrd210 User Manual

Page 15

Advertising
background image

13

English

Changing the volume level

You can change the speakers’ sound distribution to suit
your surround sound needs.

● Press CENTER +/- to adjust the volume level of the

center speaker.
➜ “CNT +XX DB” appears.

● Press REAR +/- to adjust the volume level of the rear

surround speakers.
➜ “RE +XX DB” appears.

● Press SUBW +/- to adjust the volume level of the

passive subwoofer.
➜ “SUB +XX DB” appears.

Helpful Hint:
– “

XX” denotes the volume level between -15db to 10db.

Activating progressive scan
mode

The progressive-scan display presents 60 complete frames
per second, rather than the 30 frames per second of
interlaced scanning (ordinary normal TV system.) With
nearly double the numbers of line, progressive scan offers
higher picture resolution and eliminates bothersome
motion artifacts those jagged edges on moving objects.
To enjoy the full quality potential offered by
progressive scan feature, a progressive scan TV is
required.

1

Press STANDBY ON to switch the system off.

2

Slip the P-SCAN switch (located at back panel) to “ON”

position.

3

Press STANDBY ON again to switch the system on.

Helpful Hints:
– The progressive scan video quality is only possible through
Pr/Cr Pb/Cb Y video output connection.
– You need to switch the system off before changing the
progressive scan mode.

System Setup (DVD)

The system setup is carried out via the TV, enabling you to
customize the DVD system to suit your particular
requirements. If the preferred options selected are not
available on a disc, then the disc’s own preference will be
used.

IMPORTANT !
To access the System Setup menu, playback must
be stopped.

1, 5

2, 3

4

To enter System Setup menu

1

In disc mode, press SYSTEM MENU on the remote.

icon will be highlighted in the menu bar on the TV

screen.

2

Press

4 to activate the System Setup menu.

3

Use

34 keys to select one of the setup menu options and

press

2 to enter the menu.

4

Press OK to confirm your selection.

5

To exit the System Setup menu, press SYSTEM MENU
or OK.

P

REPARATIONS

Picture Setup

Sound Setup

Language Setup

Feature Setup

Advertising