Philips Magnavox mrd210 - Manual (Page 19)

17
English
IMPORTANT!
– DVD discs and players are designed with
regional restrictions. Before playing a disc, make
sure the disc is for the same zone as your player.
– Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
– Do not push on the disc tray or put any objects
other than discs on the disc tray. Doing so may
cause the disc player to malfunction.
– Do not move the disc player during playback,
as doing so may damage the DVD system.
Playable discs
Your DVD player is able to play :
– Digital Video Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Compact Discs (CDs)
– MP3 discs, Picture (Kodak, JPEG) files on CD-R(W).
– ISO 9660 format, UDF format
– Maximum 12 characters display
– Maximum nested directory is 8 levels
– The maximum album number is 32
– The maximum title number is 999
– Supported sampling frequencies for MP3 disc are :
32 kHz, 44.1 kHz, 48 kHz
– Supported Bit-rates : 32~256 (kbps) and variable bit-
rates
– MPEG-1 layer 2 and 3 Audio (MP3)
Region Codes
DVDs must be labeled for ALL regions or for
Region 1 in order to play on this DVD system.
You cannot play discs that are labeled for other
regions.
Helpful Hint:
– If you are having trouble playing a certain disc, remove the
disc and try a different one. Improperly formatted discs will
not play on this DVD system.
Basic playback
1 Press SOURCE until “ DISC” appears on the display panel
(or DISC on the remote.)
2 Press OPEN•CLOSE
0 button to open the disc tray and
load a disc, then press OPEN•CLOSE 0 again to close
the tray.
➜ Make sure the label side is facing up. For double-sided
discs, load the side you want to play face up.
➜ There will be a short delay while the player identifies the
disc and reads the menu from the disc.
● Some discs will start playing automatically, and others will
display the Disc Contents Menu on the TV screen. If the
menu is presented, use
3 4 1 2 keys to highlight your
selection and press OK to confirm. To select a play option,
press numeric keypad (0-9.)
3 PressÉÅ to start playback.
Helpful Hint:
–
If the inhibit icon appears on the TV screen when a
button is pressed, it means the function is not available
on the disc you are playing.
– You are not able to operate the system using
3 4 1 2
keys on the remote when playing an VCD with PBC mode on.
To interrupt playback
● PressÉÅ.
➜ The picture freezes and the sound will mute.
● To resume playback, pressÉÅ again.
To stop playback
● Press Ç.
Skipping to another track/chapter
● Press S or T repeatedly during playback to skip
backward or forward. Each press will take the disc to the
beginning of the current or next track/chapter.
Helpful Hint:
– If the REPEAT TRACK mode is active, pressing
S or
T will replay the same track/chapter.
To skip to the beginning of the current track/
chapter during playback
● Press S once.
To go directly to any track/chapter
● Use the numeric keypad (0-9) to enter the number of
the desired track/chapter.
Fast Search within a track/chapter
1 Hold down
S or T about two seconds to fast
reverse or forward the disc.
2 To resume normal play, pressÉÅ .
Disc Operations
D
ISC
O
PERATIONS
1
ALL