Motorola ME6091 - Manual (Page 37)

35
Reset the Cordless to Default
You can reset your Telephone Base to its original (default) settings.
1.
Press the ‘Menu/OK’ key. Setup HS will be displayed, press the ‘Menu/OK’ key again
2. Use the and keys to scroll to Reset and press the ‘Menu/OK’ key
3. A check screen will appear ‘Reset?’
4. Press the ‘Menu/OK’ key to confirm or the ‘
key to return to idle
Changing the Handset Base PIN from the Cordless Handset
1.
Press the ‘Menu/OK’ key. Use the key to scroll to Setup BS. Press the ‘Menu/OK’ key
2. Change PIN will be displayed. Press the ‘Menu/OK’ key
3. Using the keypad enter the old PIN. Note: The default PIN is ‘0000’
4. Using the keypad enter your new 4 digit PIN and press the ‘Menu/OK’ key
5. Repeat PIN will be displayed. Using the keypad enter your new 4 digit PIN and and press the
‘Menu/OK’ key
6. Press the key to return to idle
Changing the Handset Base Dial Mode from the Cordless Handset
The dialling mode is pre-set to ‘Tone’. Only change this to ‘Pulse’ if you are advised to do this by
your switchboard provider or if your phone does not work using ‘Tone’ dialling.
1.
Press the ‘Menu/OK’ key. Use the key to scroll to Setup BS. Press the ‘Menu/OK’ key
2. Use the key to scroll to Dial Mode and press the ‘Menu/OK’ key
3. Use the and keys to scroll to ‘Tone’ or ‘Pulse’ and press the ‘Menu/OK’ key to select
4. Press the
key to return to idle
u
ne
M
e
ht
g
ni
s
U
35
The personal data on your handset,
such as Phonebook, Call Log and Redial
entries will be lost when you reset your
base to default.